binding or pairing SC2 with bebeop 2

[oscar30340]

Hello,
I am trying to know the exact binding procedure of a bebop 2 to a skycontroller 2.
Yesterday, i updated bebop 2 and skycontroller 2, after that they were no longer connected.
I did a lot of tests, a little at random I admit. Without success. Then after an hour, the two connected, but without really knowing why or how.
So I would like to know the official way to make a correct pairing.
How to do for example when we buy the skycontroller 2 later ? ( not in a bundle )
Does anyone know it?
Thank you very much and sorry for my bad english ......

[larry31]

This may help. It works for me with my Galaxy Tablet, Skycontroller2, and Bebop2.

https://www.youtube.com/watch?v=eT3fU868aIY

[oscar30340]

thank you for the answer. I watched the video carefully.
I do almost the same thing, but does it also work with a skycontroller and a bebop 2 that have never been connected ?
Does the bebop connect to the nearest skycontroler ?
It would be weird and dangerous.
If I do the same method but with another skycontroller,
with the skycontroller 2 of my disco, it never connects with the bebop 2. The indicator remains flashing red.
That's why I think there is a spécial manipulation to be done to pair a couple bebop 2 + skycontroler 2 .
thanks again

[larry31]

I really don't know! Maybe some other with more experience will decide to help out.
Fly hi & Safe

[sergey]

If you don't setup WPA password for WiFi connection, its really connects to the first drone. Someone can hijack your drone
If you have WPA password set (or you renamed drone's WiFi network), on a main screen of android free flight pro you have to click on icon which looks like "WiFi signal". This will open menu to connect sc2 to the specific WiFi.

[oscar30340]

I'll try this afternoon. I have two skycontroller 2, a disco and a bebop 2. Each has its own paired skycontroler. I had already tried with the bebop and the disco skycontroler , it had not worked. No connections between the two. There is no WPA password and the network name have not been changed, well not that I know. I will tell you the result.
Thanks for your help.

[oscar30340]

Well, after testing, this is the right solution.
However, my bebop did not connect by itself
It is necessary to press the icon "Connected" in Free flight pro then to choose the drone to connected to SC2 and a few seconds later, the indicator of SC2 becomes fixed green. Connection OK. Then I had the indication of the bebop in FFpro
I had to press "Connected" several times, because my Bebop did not appear in the list.
Now my bebop is paired with the SC2 of my disco. and there is no point in repeating the manipulation. It connects immediately.
A big thank-you and still sorry for my bad english