Login to disable ads!

Repairing my crashed bb2

Questions and answers about Bebop, Bebop 2 and the Parrot Skycontroller.
asmith61
Just flips over
Posts: 79
Joined: 06 Oct 2018, 09:18
Drone Type: Bebop 2
Has thanked: 80 times
Been thanked: 13 times

Repairing my crashed bb2

Post by asmith61 » 03 Dec 2018, 22:08

Hi
Trying to repair my crashed bb2
I have taken the bb2 to pieces and I have some broken bits please see pics the black bits on the pins have broken off of the body and I was wondering if the body is a part that can be purchased?
You do not have the required permissions to view the files attached to this post.

Apolonio
Ready for take off
Posts: 42
Joined: 04 May 2018, 03:49
Drone Type: Bebop 2
Has thanked: 0
Been thanked: 19 times

Re: Repairing my crashed bb2

Post by Apolonio » 04 Dec 2018, 18:17

Sorry to hear of your crash, there may be a way to repair the damaged mounting pin areas.

Parrot doesn’t sell the lower board portion you’re needing, eBay has complete working boards for about $80.00 maybe less. You can epoxy the pin with another small bolt on the damaged areas, then fill in with epoxy covering the area so the epoxy when dry has enough bond strength because it’s clingjng to outer plastic around the pin area. Just make sure the pins dry straight and are centered over the original threaded hole, this should work.

I’ll enclosed a coupe of pics to give you an idea, keep us posted.

Paul
You do not have the required permissions to view the files attached to this post.

asmith61
Just flips over
Posts: 79
Joined: 06 Oct 2018, 09:18
Drone Type: Bebop 2
Has thanked: 80 times
Been thanked: 13 times

Re: Repairing my crashed bb2

Post by asmith61 » 04 Dec 2018, 18:46

Hi Paul
Thank you for your reply :D
That is the answer I was looking for :lol:
I was hoping I could fix this using epoxy/Araldite I have new pins and black disc set and of course new set of propellers :)

I will keep you posted :lol:

King regards Alby

Apolonio
Ready for take off
Posts: 42
Joined: 04 May 2018, 03:49
Drone Type: Bebop 2
Has thanked: 0
Been thanked: 19 times

Re: Repairing my crashed bb2

Post by Apolonio » 05 Dec 2018, 19:30

That’s great! After some thought, the original broken pins with the broken piece of plastic mount with plenty of epoxy should be enough strength when dry to bond the pin. Try this first, use the original pin with broken piece attached with plenty of epoxy with rubber boot mounted as well, so pin, broken piece and rubber boot are expoxied together. This surely will help bond this area.

Just make sure the upper threaded pin portion needs to be the same height as the good pins. So the frame fastens level no issues of looseness or too tight, good luck keep us posted.

Paul

asmith61
Just flips over
Posts: 79
Joined: 06 Oct 2018, 09:18
Drone Type: Bebop 2
Has thanked: 80 times
Been thanked: 13 times

Re: Repairing my crashed bb2

Post by asmith61 » 09 Dec 2018, 18:48

Hi Paul
Thanks again for your reply
This is what I done at work on Friday, I have left it to set over the weekend and on Monday I was going to fill the round hole with epoxy for extra strength ? ( not sure if the rubber boot / suspension has to fit in to this hole ? I have attached a couple of pics of the initial first fix.
You do not have the required permissions to view the files attached to this post.

Apolonio
Ready for take off
Posts: 42
Joined: 04 May 2018, 03:49
Drone Type: Bebop 2
Has thanked: 0
Been thanked: 19 times

Re: Repairing my crashed bb2

Post by Apolonio » 10 Dec 2018, 06:41

Good job, excellent that should work once you feel in with epoxy. With the rubber boots, my suggestion was to fill with epoxy and then insert the rubber boot so all dries intact. Just a suggestion, so rubber boots are probably at correct height when assembling the body. Plus, the boots holds the epoxy in place when drying, just pour enough to cover shaft boot will keep all epoxy in place.

Good luck, keep us posted how she flies 👍
Paul

asmith61
Just flips over
Posts: 79
Joined: 06 Oct 2018, 09:18
Drone Type: Bebop 2
Has thanked: 80 times
Been thanked: 13 times

Re: Repairing my crashed bb2

Post by asmith61 » 14 Dec 2018, 23:37

Hi Paul
She is all back together now 🤞

Just done a test take off in the kitchen didn’t go to well not sure if I have the propellers on the correct way please see short video if it will load up ?

Regards Alby
You do not have the required permissions to view the files attached to this post.

asmith61
Just flips over
Posts: 79
Joined: 06 Oct 2018, 09:18
Drone Type: Bebop 2
Has thanked: 80 times
Been thanked: 13 times

Re: Repairing my crashed bb2

Post by asmith61 » 14 Dec 2018, 23:43

Hi Paul

The video didn’t load it said error file to big

What happened was the front was started to lift off but not the back ?
And it sounded different
Any ideas Paul ?

Regards Alby

Apolonio
Ready for take off
Posts: 42
Joined: 04 May 2018, 03:49
Drone Type: Bebop 2
Has thanked: 0
Been thanked: 19 times

Re: Repairing my crashed bb2

Post by Apolonio » 15 Dec 2018, 05:50

Hello,

Yes props are not placed correctly, I’ll post a pic. The circled props have the holes punched in the center of props, they mount here. The other two props are solid, no punched holes. They mount on opposite sides to the punched hole props.

Hope this helps, looks like you’re 👍. Good job☃️
Paul
5A7C78E8-5606-407B-9BDB-407B6AD1E39F.jpeg
You do not have the required permissions to view the files attached to this post.

asmith61
Just flips over
Posts: 79
Joined: 06 Oct 2018, 09:18
Drone Type: Bebop 2
Has thanked: 80 times
Been thanked: 13 times

Re: Repairing my crashed bb2

Post by asmith61 » 15 Dec 2018, 10:46

Hello Paul
This is what I thought I can see my error now( and that is what my wife thought also :oops: )

We are off Christmas shopping now so will change them later and let you know :lol:

Alby

asmith61
Just flips over
Posts: 79
Joined: 06 Oct 2018, 09:18
Drone Type: Bebop 2
Has thanked: 80 times
Been thanked: 13 times

Re: Repairing my crashed bb2

Post by asmith61 » 15 Dec 2018, 19:41

Hi Paul
Just checked my propellers to your pics and mine where the same as yours but changed them around anyway and tried again but the same outcome it is a shame I can not send the very short video of this, I was wondering if you had what’s app ? My first thought is maybe I have put the cross frame on the wrong way round ?

Sorry to be a pain Paul

Alby

User avatar
waterlanding
Thinking of bearings
Posts: 173
Joined: 11 Nov 2017, 18:01
Drone Type: Bebop 2
Has thanked: 33 times
Been thanked: 51 times

Re: Repairing my crashed bb2

Post by waterlanding » 15 Dec 2018, 21:56

asmith61 wrote:
15 Dec 2018, 19:41
Hi Paul
Just checked my propellers to your pics and mine where the same as yours but changed them around anyway and tried again but the same outcome it is a shame I can not send the very short video of this, I was wondering if you had what’s app ? My first thought is maybe I have put the cross frame on the wrong way round ?

Alby
It's impossible to put the cross frame on backwards, but check the wires plugged into the motherboard on the back. They should cross over each other. It's a common mistake to plug the left motor into the left socket, and the right into the right socket. The left motor plugs into the right socket and visa versa.

I've uploaded Parrot's Bebop 2 Repair pictorials. Take a look at section 9, paragraph 2 of the link below.
http://www.pennekamp.com/Bebop-2-repair.pdf

asmith61
Just flips over
Posts: 79
Joined: 06 Oct 2018, 09:18
Drone Type: Bebop 2
Has thanked: 80 times
Been thanked: 13 times

Re: Repairing my crashed bb2

Post by asmith61 » 15 Dec 2018, 22:46

Thank you waterlanding

I will take a look now 👍

asmith61
Just flips over
Posts: 79
Joined: 06 Oct 2018, 09:18
Drone Type: Bebop 2
Has thanked: 80 times
Been thanked: 13 times

Re: Repairing my crashed bb2

Post by asmith61 » 15 Dec 2018, 22:51

Hi waterlanding

You were right see pic
You do not have the required permissions to view the files attached to this post.

asmith61
Just flips over
Posts: 79
Joined: 06 Oct 2018, 09:18
Drone Type: Bebop 2
Has thanked: 80 times
Been thanked: 13 times

Re: Repairing my crashed bb2

Post by asmith61 » 15 Dec 2018, 23:26

Hi waterlanding
Just changed them over going to put the legs back on then try it

Post Reply

Who is online

Users browsing this forum: Google [Bot], larry31 and 2 guests