(almost) all Bebop 1 and Bebop 2 Motor Error Codes

Questions and answers about Bebop, Bebop 2 and the Parrot Skycontroller.
Post Reply
User avatar
AR.Tommy
Charged up again
Posts: 1247
Joined: 07 Oct 2010, 07:59
Drone Type: Bebop
Has thanked: 39 times
Been thanked: 34 times

(almost) all Bebop 1 and Bebop 2 Motor Error Codes

Post by AR.Tommy » 06 Nov 2018, 06:54

Almost all Bebop motor error codes:

Motor Failure Error Code (1), EEPROM access failure
Motor Failure Error Code (2), Motor stalled
Motor Failure Error Code (3), Propeller cutout security triggered
Motor Failure Error Code (4), Communication with motor failed by timeout
Motor Failure Error Code (5), RC emergency stop
Motor Failure Error Code (6), Motor controller scheduler real-time out of bounds
Motor Failure Error Code (7), One or several incorrect values in motor settings
Motor Failure Error Code (8), Battery voltage out of bounds
Motor Failure Error Code (9), Incorrect number of LIPO cells
Motor Failure Error Code (10), defect MOSFET or broken motor phases
Motor Failure Error Code (11), too hot or too cold cypress temperature
http://www.digitalsirup.com

Sweet and delicious apps for your drones.

asmith61
Just flips over
Posts: 52
Joined: 06 Oct 2018, 09:18
Drone Type: Bebop 2
Has thanked: 64 times
Been thanked: 11 times

Re: (almost) all Bebop 1 and Bebop 2 Motor Error Codes

Post by asmith61 » 06 Nov 2018, 17:43

Hi Ar.tommy

Thank you for this information I will keep this safe for future reference :D

mahodder
Newcomer
Posts: 4
Joined: 04 Dec 2018, 14:34
Drone Type: Bebop 2
Has thanked: 1 time
Been thanked: 2 times

Re: (almost) all Bebop 1 and Bebop 2 Motor Error Codes

Post by mahodder » 04 Dec 2018, 14:36

"Motor Failure Error Code (11), too hot or too cold cypress temperature"

What does this mean?

User avatar
AR.Tommy
Charged up again
Posts: 1247
Joined: 07 Oct 2010, 07:59
Drone Type: Bebop
Has thanked: 39 times
Been thanked: 34 times

Re: (almost) all Bebop 1 and Bebop 2 Motor Error Codes

Post by AR.Tommy » 04 Dec 2018, 14:42

This means the motor is either too cold or too hot. (Or the sensor is broken)
http://www.digitalsirup.com

Sweet and delicious apps for your drones.

mahodder
Newcomer
Posts: 4
Joined: 04 Dec 2018, 14:34
Drone Type: Bebop 2
Has thanked: 1 time
Been thanked: 2 times

Re: (almost) all Bebop 1 and Bebop 2 Motor Error Codes

Post by mahodder » 04 Dec 2018, 16:37

Weird, I'm getting a Motor 11 error now on a back motor on my Bebop 2 and I've replaced the motor and did a full drone reset but it's still giving me that same error.

The sensor is on the mainboard and each motor has their own I wonder?

I haven't done a complete disassemble yet - I guess that is my next step to see what's up. :geek:

User avatar
AR.Tommy
Charged up again
Posts: 1247
Joined: 07 Oct 2010, 07:59
Drone Type: Bebop
Has thanked: 39 times
Been thanked: 34 times

Re: (almost) all Bebop 1 and Bebop 2 Motor Error Codes

Post by AR.Tommy » 04 Dec 2018, 16:44

Personally I had this error only once and a simple reboot of the Bebop fixed it. Are you sure you did the reset correctly?
http://www.digitalsirup.com

Sweet and delicious apps for your drones.

mahodder
Newcomer
Posts: 4
Joined: 04 Dec 2018, 14:34
Drone Type: Bebop 2
Has thanked: 1 time
Been thanked: 2 times

Re: (almost) all Bebop 1 and Bebop 2 Motor Error Codes

Post by mahodder » 04 Dec 2018, 16:53

All my wifi settings and everything was wiped but I'll try again before taking it apart to make sure.

Post Reply

Who is online

Users browsing this forum: No registered users and 99 guests