video connection alert

Problems of AR Drone 2.0, Freeflight 2, Flight Recorder GPS, Qgroundcontrol... etc.
Post Reply
pavanbn
Newcomer
Posts: 3
Joined: 21 Nov 2017, 06:55
Drone Type: AR.Drone 2
Has thanked: 0
Been thanked: 0

video connection alert

Post by pavanbn » 21 Nov 2017, 07:02

After taking off the drone. It is moving abruptly and giving video connection alert error. Any suggestions to fix this issue? I replaced and checked body of the drone but no joy.

Thanks and Regards,
Pavan

User avatar
solaris8x86
Strange wobble
Posts: 233
Joined: 23 Jun 2015, 17:02
Drone Type: Bebop 2
Has thanked: 0
Been thanked: 2 times

Re: video connection alert

Post by solaris8x86 » 21 Nov 2017, 08:31

pavanbn wrote:
21 Nov 2017, 07:02
After taking off the drone. It is moving abruptly and giving video connection alert error. Any suggestions to fix this issue? I replaced and checked body of the drone but no joy.

Thanks and Regards,
Pavan
Make sure the flat video cable is "deep in" enough to the board's connector.
Advancing Bebop 2 to Router Mod with deep explanation: http://youtu.be/cumh4VZonVE
Bebop 2 Flight Record #0010 Finale (must watch): http://youtu.be/1pNyMSKwWaQ

morvis213
Newcomer
Posts: 1
Joined: 04 Dec 2017, 17:32
Drone Type: AR.Drone 2
Has thanked: 0
Been thanked: 0

Re: video connection alert

Post by morvis213 » 04 Dec 2017, 17:36

I get the same thing. Works for a few frames then drops out connection. On 3 different android phones, using Freeflight.
But works no problem with AutoFlight and viewing video stream via browser on a computer connected to the drone.

pavanbn
Newcomer
Posts: 3
Joined: 21 Nov 2017, 06:55
Drone Type: AR.Drone 2
Has thanked: 0
Been thanked: 0

Re: video connection alert

Post by pavanbn » 13 Mar 2018, 08:26

solaris8x86 wrote:
21 Nov 2017, 08:31
pavanbn wrote:
21 Nov 2017, 07:02
After taking off the drone. It is moving abruptly and giving video connection alert error. Any suggestions to fix this issue? I replaced and checked body of the drone but no joy.

Thanks and Regards,
Pavan
Make sure the flat video cable is "deep in" enough to the board's connector.
Thank you very much for the reply. It did not work out So I brought new drone, All of a sudden this drone is also giving video connection alert error even though no crash.

Post Reply

Who is online

Users browsing this forum: No registered users and 253 guests