Login to disable ads!
(almost) all Bebop 1 and Bebop 2 Motor Error Codes
- AR.Tommy
- Serious flight time
- Posts: 1330
- Joined: 07 Oct 2010, 07:59
- Drone Type: Bebop
- Has thanked: 75 times
- Been thanked: 59 times
(almost) all Bebop 1 and Bebop 2 Motor Error Codes
Almost all Bebop motor error codes:
Motor Failure Error Code (1), EEPROM access failure
Motor Failure Error Code (2), Motor stalled
Motor Failure Error Code (3), Propeller cutout security triggered
Motor Failure Error Code (4), Communication with motor failed by timeout
Motor Failure Error Code (5), RC emergency stop
Motor Failure Error Code (6), Motor controller scheduler real-time out of bounds
Motor Failure Error Code (7), One or several incorrect values in motor settings
Motor Failure Error Code (8), Battery voltage out of bounds
Motor Failure Error Code (9), Incorrect number of LIPO cells
Motor Failure Error Code (10), defect MOSFET or broken motor phases
Motor Failure Error Code (11), too hot or too cold cypress temperature
Motor Failure Error Code (1), EEPROM access failure
Motor Failure Error Code (2), Motor stalled
Motor Failure Error Code (3), Propeller cutout security triggered
Motor Failure Error Code (4), Communication with motor failed by timeout
Motor Failure Error Code (5), RC emergency stop
Motor Failure Error Code (6), Motor controller scheduler real-time out of bounds
Motor Failure Error Code (7), One or several incorrect values in motor settings
Motor Failure Error Code (8), Battery voltage out of bounds
Motor Failure Error Code (9), Incorrect number of LIPO cells
Motor Failure Error Code (10), defect MOSFET or broken motor phases
Motor Failure Error Code (11), too hot or too cold cypress temperature
- AR.Tommy
- Serious flight time
- Posts: 1330
- Joined: 07 Oct 2010, 07:59
- Drone Type: Bebop
- Has thanked: 75 times
- Been thanked: 59 times
Re: (almost) all Bebop 1 and Bebop 2 Motor Error Codes
This means the motor is either too cold or too hot. (Or the sensor is broken)
-
- Newcomer
- Posts: 4
- Joined: 04 Dec 2018, 14:34
- Drone Type: Bebop 2
- Has thanked: 1 time
- Been thanked: 4 times
Re: (almost) all Bebop 1 and Bebop 2 Motor Error Codes
Weird, I'm getting a Motor 11 error now on a back motor on my Bebop 2 and I've replaced the motor and did a full drone reset but it's still giving me that same error.
The sensor is on the mainboard and each motor has their own I wonder?
I haven't done a complete disassemble yet - I guess that is my next step to see what's up.
The sensor is on the mainboard and each motor has their own I wonder?
I haven't done a complete disassemble yet - I guess that is my next step to see what's up.

- AR.Tommy
- Serious flight time
- Posts: 1330
- Joined: 07 Oct 2010, 07:59
- Drone Type: Bebop
- Has thanked: 75 times
- Been thanked: 59 times
Re: (almost) all Bebop 1 and Bebop 2 Motor Error Codes
Personally I had this error only once and a simple reboot of the Bebop fixed it. Are you sure you did the reset correctly?
-
- Newcomer
- Posts: 1
- Joined: 28 May 2019, 13:03
- Drone Type: Bebop 2
- Has thanked: 0
- Been thanked: 0
Re: (almost) all Bebop 1 and Bebop 2 Motor Error Codes
I had a crash landing with my Beebop 2 and now the LEFT rear motor is getting an ERROR CODE 11. Is this sort of damage/issue/thing covered under the warranty? I've only had the Beebop2 since Christmas 2018mahodder wrote: ↑04 Dec 2018, 16:37Weird, I'm getting a Motor 11 error now on a back motor on my Bebop 2 and I've replaced the motor and did a full drone reset but it's still giving me that same error.
The sensor is on the mainboard and each motor has their own I wonder?
I haven't done a complete disassemble yet - I guess that is my next step to see what's up.![]()
-
- Newcomer
- Posts: 1
- Joined: 16 Jun 2020, 22:03
- Drone Type: Bebop 2
- Has thanked: 0
- Been thanked: 0
Re: (almost) all Bebop 1 and Bebop 2 Motor Error Codes
I can't seem to reply on this forum, can't post so I'm hijacking this thread, my apologies.
I AM NEW AND NEED DIE ASSISTANCE.
IF ANYONE LIVES IN MONTREAL THAT CAN HELP ME WITH MY sky CONTROLLER PROBLEM AND I WILL PAY THEM FOR THEIR TIME.
PLEASE EMAIL AT
MAPS1212@HOTMAIL.COM
THANK YOU
I AM NEW AND NEED DIE ASSISTANCE.
IF ANYONE LIVES IN MONTREAL THAT CAN HELP ME WITH MY sky CONTROLLER PROBLEM AND I WILL PAY THEM FOR THEIR TIME.
PLEASE EMAIL AT
MAPS1212@HOTMAIL.COM
THANK YOU
Who is online
Users browsing this forum: Google Adsense [Bot] and 5 guests