Replaced motor issues

Questions and answers about Bebop, Bebop 2 and the Parrot Skycontroller.
Post Reply
Simond101
Newcomer
Posts: 3
Joined: 16 Jul 2018, 22:14
Drone Type: Bebop 2
Has thanked: 0
Been thanked: 0

Replaced motor issues

Post by Simond101 » 16 Jul 2018, 22:25

I had a motor on the right front pop off while at about 3 ft so I ordered for New Motors and replaced the one motor on the front right with A 'C" motor. Everything seemed to go as planned until I took it outside and it wants to flip itself forward. It will not even leave the ground, all the motor start up and go super fast and all of a sudden it just flips itself forward. I did recalibrate thinking it may be a calibration issue but it did the same thing. Should have I replaced All 4 Motors? Any ideas? Thank you in advance

Apolonio
Ready for take off
Posts: 26
Joined: 04 May 2018, 03:49
Drone Type: Bebop 2
Has thanked: 0
Been thanked: 1 time

Re: Replaced motor issues

Post by Apolonio » 17 Jul 2018, 06:23

Check the props, maybe one or two are positioned on the wrong motors? That's easy to do, I've done that myself.

Good luck,
Paul

Simond101
Newcomer
Posts: 3
Joined: 16 Jul 2018, 22:14
Drone Type: Bebop 2
Has thanked: 0
Been thanked: 0

Re: Replaced motor issues

Post by Simond101 » 17 Jul 2018, 12:12

Okay now that's new to me I didn't know that the props had to be on certain Motors, I know that the white ones go on the front and the black ones go in the back but each prop is different? How do I know which props go on which Motors. Thanks

Simond101
Newcomer
Posts: 3
Joined: 16 Jul 2018, 22:14
Drone Type: Bebop 2
Has thanked: 0
Been thanked: 0

Re: Replaced motor issues

Post by Simond101 » 17 Jul 2018, 13:39

Apolonio wrote:
17 Jul 2018, 06:23
Check the props, maybe one or two are positioned on the wrong motors? That's easy to do, I've done that myself.

Good luck,
Paul
That's what it was I wasn't even looking and I put two of the same kind of props on and forgot totally about the solid Center White prop 😋 thank you so much Paul

Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests