AR Drone 1.0 Serious problem, I need your help

Mirumod, Macgyver, hull, cam, propeller, leg, cross, ball bearing mods... etc.
Post Reply
ferriweb
Newcomer
Posts: 2
Joined: 06 Oct 2014, 20:09
Drone Type: AR.Drone

AR Drone 1.0 Serious problem, I need your help

Post by ferriweb » 06 Oct 2014, 20:12

My ar drone 1.0 have a serious serious problem ... I removed the whole body of the ar drone (breaking it) to take up less space and be able to hook the go pro and it flew well, and of course the central Cruzeta no body is fixed to the plate. keda .. and now released, the subject flanged and fly the drone goes for all sites ... the Cruzeta should be level with ultrasound sensors right? so the only goes for all sides ... the problem is that as enganxar .. I've seen people and such a case is made with 3D printer to fly the drone without any cork, I do not know if to buy this .. . echais if I have a cable .. because if I do not fix it I think I run drone ...

Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests