drone-forum.com

Looks like I'm not the only one having trouble with this gear:

https://www.thingiverse.com/thing:4623832
https://forum.developer.parrot.com/t/ju ... -main-gear

When you touch or move Jumping sumo, there is a specific sound queue and the drone restricts some commands for a while. I have one Sumo which does that constantly - it works fine otherwise, but when left in place it constantly makes the sound and blinks LEDs as if it was touched/moved. Does it requi...

All the jumping drones are ultra easy to repair. I really love it. And it's easy to do it with kids - they can help ie. by inserting the rear leg pull lever while you are forcing the springs into correct positions. But I haven't seen all the parts in "repair kits". In particular, I'm missing the jum...

While this could be caused by damaged boards, it is usually due to bad battery connector. Try pushing on the battery while it's in. Pushing it shouldn't cause power loss. Clean the contact points with IPA. Try a different battery. If different battery works, you may try fixing the connectors or your...

I soldered cable with the connector to the end of cable without connector. That increases resistance and inductance of cables, but the change shouldn't be large enough to make the drone unstable. Also, turns out motors between the two drones were different. So if you're replacing Sumo motors, make s...

Oh joy, my post is finally visible. After two days.

This was a mistake.
Question no longer relevant.

I have 2 damaged Sumos, one has motors soldered directly to a cable, second has a nice 2-pin connector.

The plan is to make one working Sumo out of these. I really like the connector and would like to use it.

What is the connector model marking?