drone-forum.com

Many things can cause jello.
First of all, check the body and all four legs for a break, if not check the propellers or replace them.
If jello persists go to check motors and then "suspension".

Use of WD40? This is not suitable for this job. Dust will be gathered soon. About fan: the connecting cable fits into a plastic box with pins (J13 on the board). What is missing?

Hi, I assume that you made a reset before all. Do the drone makes the usual 4 motors check sound? If yes, try to "take off" with the motors connected but without propellers. Try to see if "takes off" and observe all motors spinning well. After a few moments press the landing button. I don't think th...

Everything with a larger antenna than this of mobile phone, will help to extend your range. I personally use a USB extender:
https://www.totolink.net/home/menu/deta ... ds/33.html

Long press the thumbnail to select item, then delete. You can use delete all also or select many items at a time.
Also connect the Bebop using a USB cable to a computer and delete items showing in the folder.

Thanks. I will not take any risk to use the battery. I just wanted to find an explanation as the battery charged to 12.60V with my charger....

The latest FFPro version works fine with the Bebop 1.
Please after any Freeflight Pro udpate you have to reset the drone. Try this and tell me the results.

My first post, hoping to find an explanation. I bought recently 2 1700mAh Lipos. The first works fine and gives 10+ minutes of flight time. The second charges OK but at the output gives only 8.07V so does not power the Bebop (I charge all my batteries with a ISDT Q6 lipo charger). So as the seller i...