Skycontroller 2 will not connect

Questions and answers about Bebop, Bebop 2 and the Parrot Skycontroller.
Post Reply
Grounded86
Newcomer
Posts: 1
Joined: 30 May 2018, 02:11
Drone Type: Bebop 2
Has thanked: 0
Been thanked: 0

Skycontroller 2 will not connect

Post by Grounded86 » 30 May 2018, 02:27

I have just received my Bebop 2 and Skycontroller 2 and I am unable to get them to connect. The controller turns on, light goes orange, blinks green for a second and then flashed orange. I am able to connect my phone to the Bebop 2 and fly it that way. However when I connect my phone to the controller it will not register in the free fly app or connect with the drone. Any help would be greatly appreciated. thank you.

Apolonio
Ready for take off
Posts: 39
Joined: 04 May 2018, 03:49
Drone Type: Bebop 2
Has thanked: 0
Been thanked: 12 times

Re: Skycontroller 2 will not connect

Post by Apolonio » 31 May 2018, 16:05

After turning on the Sky controller 2, connect your phone. Open the app and WiFi will connect. Then select (Connect), select Drone bebop 2 ect on Freefight Pro to register bebop to the Sky controller 2. Once pared, you won't need to do this again and will connect automatically on future flights.

Good luck, you'll enjoy the Bebop2 with the Sky controller 2.

Paul

camimu1979
Newcomer
Posts: 4
Joined: 04 Jun 2018, 23:41
Drone Type: Bebop 2
Has thanked: 0
Been thanked: 0

Re: Skycontroller 2 will not connect

Post by camimu1979 » 04 Jun 2018, 23:48

Hello , somebody could help me with this specific issue with my skycontroller 2 mainboard. This piece was detached and i need to know what kind of element is.

Also a schematics will be useful of the skycontroller.

Thanks a lot.
missing part skycontroller.jpg
You do not have the required permissions to view the files attached to this post.

Apolonio
Ready for take off
Posts: 39
Joined: 04 May 2018, 03:49
Drone Type: Bebop 2
Has thanked: 0
Been thanked: 12 times

Re: Skycontroller 2 will not connect

Post by Apolonio » 07 Jun 2018, 05:18

I believe that is the USB connector, give me a day or two to post a picture of what it looks like attached.

You may be able to resolder the lugs back on, hang on I'll get back with you.

Apolonio

User avatar
AR.Tommy
Serious flight time
Posts: 1280
Joined: 07 Oct 2010, 07:59
Drone Type: Bebop
Has thanked: 57 times
Been thanked: 49 times

Re: Skycontroller 2 will not connect

Post by AR.Tommy » 07 Jun 2018, 08:53

I think he is referring to that little gizmo in front of the USB connector (where the red arrow is pointing to)
http://www.digitalsirup.com

Sweet and delicious apps for your drones.

camimu1979
Newcomer
Posts: 4
Joined: 04 Jun 2018, 23:41
Drone Type: Bebop 2
Has thanked: 0
Been thanked: 0

Re: Skycontroller 2 will not connect

Post by camimu1979 » 08 Jun 2018, 15:59

yes, there is a little coil that was detached from the board. I havent identify which component is or reference. I am trying to get the draw schematic from parrot but apparently is impossible. I appreciate any help. Thanks

ItsTheWearyKind
Newcomer
Posts: 1
Joined: 23 Dec 2018, 20:48
Drone Type: Bebop 2
Has thanked: 0
Been thanked: 0

Re: Skycontroller 2 will not connect

Post by ItsTheWearyKind » 23 Dec 2018, 20:52

Hi all, I have the same problem with my Parrot BB2 power, the SC 2 is only turning on with a Red led and not responding anymore, does anyone have the same problem? I received the new update but It is installed completly and then the SC gets locked with the red led.

Thaks and regards.

Simond101
Newcomer
Posts: 4
Joined: 16 Jul 2018, 22:14
Drone Type: Bebop 2
Has thanked: 0
Been thanked: 0

Re: Skycontroller 2 will not connect

Post by Simond101 » 31 Dec 2018, 21:07

I'm having the same issues I just did an update of my skycontroller 2 and now the drone will not connect to the controller anymore. Is there a way to take the update off so I can go back?

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest