Mikrokopter Quadro XL Professional Quadcopter - Huge Bundle! Ready To Fly - £1150 - Offers! :)

I don't need it, Do you? For a price or swopsies.
Post Reply
gjs4585
Newcomer
Posts: 1
Joined: 20 Aug 2016, 20:24
Drone Type: AR.Drone
Has thanked: 0
Been thanked: 0

Mikrokopter Quadro XL Professional Quadcopter - Huge Bundle! Ready To Fly - £1150 - Offers! :)

Post by gjs4585 » 20 Aug 2016, 20:29

This was bought for an aerial photography job that is now complete, I thought I would be using it more, but have found it surplus to requirements (i'm a cameraman and build drones, although not this one,it was from buzzflyer) hence, now for sale!

http://www.buzzflyer.co.uk/MikroKopter- ... -2086.aspx (retailing today for £2495.95)

It is a complete, ready to fly kit, all you will need to do is charge the batteries and fly!

This is a really great bit of kit to fly, I was using a Sony NEX-5r with it,but most compact/ small DSLR cameras will fly happily. It is capable of fully autonomous flight (with the ground station),the camera can be triggered from the transmitter (video and photo), the gimbal can also be controlled from the transmitter. 560mm (motor to motor) Heavy lift MK3638 motors and 12" props mean a payload of 1KG can be transported.

I opted for the DJI NAZA V2 flight controller as its much more stable and user friendly than the Mikrokopter one (mentioned in the link above) all of the components are top of the range, from video TX to the screen on the ground.

Whats included;

Mikrokopter Quadro XL - (see link above for basics - very similar) has a DJI NAZA V2 with GPS. Ready to fly (ESC,motors,FC etc..)

Video Transmitter (boscam I think)

Photohigher AV130 Gimbal with RSGS stabilisation (can carry a full sized DSLR camera)

Droidworx extended landing gear

Peli Case to transport everything

Devention (walkera) Devo 10 transmitter (and associated receiver in the quadcopter)

4 batteries (2 will need an adapter made)

Charger and bench power supply to ensure steady voltages when charging (not necessary but good to have)

9 x spare graupner props ( plus 4 already installed)

A bag of spare cables and bits and bobs

DJI wireless data link (ground station) allows you to plot way-point flying from a laptop or ipad for fully autonomous flying.

DJI BTU (bluetooth) module

Instruction manuals

Flysight Black Pearl monitor (best in the business) for FPV flying

Remote IR trigger for cameras mounted on the gimbal - linked to the transmitter

Freefly HDMI cable and converter to link the camera to the transmitter for FPV flight.

LED Running lights

Spare Mikrokopter motor

(I think that's everything!!)


If you would like any more pictures or to ask any questions - please feel free to contact me - 07935514979 - or message me here.
mikro1.jpg
mikro2.jpg
mikro3.jpg
mikro4.jpg
mikro5.jpg
mikro6.jpg
mikro7.jpg
mikro8.jpg
mikro9.jpg
mikro10.jpg
You do not have the required permissions to view the files attached to this post.

Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests